So it is now time to make over our bedroom. It’s still in the drab white that was painted with the house built. In an effort to maximize our dollars we decided to give our current bedroom suit a make over. There are several things wrong with it all of which I will fix over time but the first thing that hits you is it’s just plain ugly. We still haven’t totally figured out why we bought it 10 years ago. I guess we were young it was in our budget and we needed furniture for the house we had just moved into. That being said how do you take a 10 year old not so good looking night stand and bring it into the new decade. Let’s explore this in a little pictorial.
The ugly nightstand 
I guess really it’s not all that bad but it is far from our current taste in furniture and design. I have some ideas on how I would like to fix this guy. The first thing that needs to happen is that I need to remove all that molding next to the drawers. I just think it really disrupts the look of the nightstand. So what to do….. Find one chisel well two actually and one hammer and presto you get the following result.
The Ugly Nightstand Molding Removed 
Now how did I do this? It is not that hard really. The molding was nailed and glued in place and my goal was to have as little tear out as possible so take one of our chisels and place it on the back edge of the molding and start tapping it breaking the glue joint and prying the molding away. Take your time and do a little bit at a time. You are most likely going to get some tear out, not to worry we will address that in a minute. Eventually you will be able to pry the moldings off of the project and you get to take a cool picture like this one.
Demolition Tools 
As you can see the moldings don’t always come off in one piece no problem I had not planned on using them for anything anyway. Now we can address any tear out that may have occurred. There are at least two ways of dealing with it. One if you are planning to paint you can fill any of the tear out with wood putty if they are really bad, do this before you start any sanding, let the pudding try and sand it flush with the rest of the wood. Now if you are going to stain the project then the putty isn’t probably a good idea as the stain at least in my experience will be soaked up more and look different than the rest of the wood. If you are in this situation or if the tear out is not all that bad then you can do what I did. I sanded the faces down until most of the tear out was gone and anything that was real deep I smoothed out with the sand paper and made them appear and part of the character of the project.
A Sanding we will go….. 
Here is the result of a few couple of hours of sanding. I wasn’t worried about totally removing all of the finish that was on the nightstand previously. I mainly wanted to get it scratched up real good so that the latex paint I am using would have something to grab a hold of and stick to. If you can get it to bare wood all the better but I didn’t find it totally necessary on this project refinish.
And now through the power of the internet we have a mostly refinished nightstand. 
You can paint the sides if you want to, I decided it wasn’t needed as the drawers are closed 99% of the time.
Now that you have everything painted you can either put the hardware back on and be done or you can distress things just a little. I spent a little time sanding off the paint in some key areas. It is pretty hard to tell from the picture but there are several distressed areas. I took the sand paper and sanded until I got bare wood and then took a little stain and stained over the area let it dry for just a little while and wiped the excess away. Once I was done I had the following refinished nightstand. 
So I hope you have fun taking on your own refinishing project. If you have any questions please feel free to email.
Here is a before and after side by side: 
Have a great day! --Grover
0 comments:
Post a Comment